Digiplex DGP-641 Manual de Instalação descarregar pdf (Página 21)

DGP-848 Control Panel 17

5 Keyswitch Programming

The Digiplex control panel can support up to 8 keyswitch zones in

addition to the 48 standard zones. A keyswitch allows a user to arm

or disarm a system by pressing a key or by toggling a keyswitch.

The keyswitches are connected to the hardwired input terminals of

either the Digiplex control panel, zone expansion modules or the

keypad. For more information on the installation of keyswitches,

please refer to section 2.14 on page 7. Keyswitches must be

assigned to a keyswitch zone and that zone must be defined as

described in this section:

Keyswitch Numbering [049] to [056]:

• Serial # of the Module

• Input # of the Module

Keyswitch Parameters [149] to [156]:

• Keyswitch Definitions

• Keyswitch Partition Assignment

• Keyswitch Options

The Keyswitch Numbering feature enables you to individually

assign each input to any keyswitch zone in the Digiplex system.

Please refer to section 5.1 for details. The Keyswitch Parameters

define the keyswitch's partition assignment and its arming method

(see section 5.2 to section 5.4 on page 18).

Figure 18: Keyswitch Programming

5.1 Keyswitch Numbering

SECTIONS [049] TO [056]

The Keyswitch Numbering feature allows you to assign any

hardwired input in the system to any of the 8 keyswitch zones in

the Digiplex control panel. This feature tells the control panel where

the keyswitch is connected and which of the 8 keyswitch zones is

assigned to that keyswitch. To assign a keyswitch connected to a

hardwired input terminal, program the module's serial number and

the number of the input where the keyswitch is connected into the

section corresponding to the desired keyswitch zone (see Figure

19 on page 18).

Press & hold the

[0] key

Key-in

[

INSTALLER CODE]

Key in 3-digit

[

SECTION]

Keyswitch Numbering

Sections [049] to [056] represent

keyswitches 1 to 8 respectively

Keyswitch Parameters

Sections [149] to [156] represent

keyswitches 1 to 8 respectively

Enter the 8-digit

[

SERIAL NUMBER] of the

module that has a keyswitch

connected to it.

Enter the module’s 3-digit

[

INPUT NUMBER] where the

keyswitch is connected.

Keyswitch Definition

First Digit

Keyswitch Partition

Assignment

Second Digit

Keyswitch Options

Feature Select

Press [

ENTER]

Select

one only

Select one only

Set the [5] key

on/off and select

one arming option

Keyswitch Definitions

0 - Keyswitch Disabled

1 - Momentary Keyswitch

2 - Maintained Keyswitch

3 - Generates a Utility Key Event on

Open

4 - Generates a Utility Key Event on

Open and Closed

Keyswitch Partition Assignment

1 - Keyswitch Assigned to Partition 1

2 - Keyswitch Assigned to Partition 2

3 - Keyswitch Assigned to Partition 3

4 - Keyswitch Assigned to Partition 4

Keyswitch Options

[1] to [3] Future Use

[4] Stay/Instant disarm

[5] On = Arm Only

Off = Arm/disarm

[6] *Stay arming

[7] *Force arming

[8] *Instant arming

* Select one only; if all are off, defaults

to regular arming.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Comentários a estes Manuais

Sem comentários

Digiplex DGP-641 Manual de Instalação Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digiplex DGP-641