Digiplex DGP-641 Especificações descarregar pdf (Página 10)

Digiplex LCD Keypad 9n

4.0 SYSTEM OPTIONS

4.1 PARTITION ASSIGNMENT

Section 001: Options [1] to [4]

Each keypad in the Digiplex system can be assigned to one or more

partitions. In section [001], options [1] to [4] represent partitions 1

through 4 respectively. To assign the keypad to a partition, simply

enable the option that corresponds to the desired partition. For

example, Step 6 in Figure 3-1 on page 6, would show options 1 and 4

enabled. Therefore, the keypad would be assigned to partitions 1

and 4 only. (By default, partition 1 to partition 4 are enabled.)

4.2 DISPLAY CODE ENTRY

Section 002: Option [1]

The digits of the User Access Codes can be displayed on the LCD

screen when they are entered.

Option [1] OFF = Digits are replaced by a *. (default)

Option [1] ON = Access Code digits will be displayed.

4.3 DISPLAY EXIT DELAY TIMER

Section 002: Option [2]

Based on the user's needs, an Exit Delay Timer will be programmed to

provide the user time to exit the partition before the system is armed.

The Exit Delay Timer's countdown can be displayed on the LCD screen.

Option [2] OFF = Will not display Exit Delay timer (default)

Option [2] ON = LCD screen will display Exit Delay timer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Sem comentários

Digiplex DGP-641 Especificações Página 10